Repeat Playback; Marking Desired Scenes - Sansui HDLCDVD320A Owner's Manual

2
Press or to select the "Time", "Title/track"
or "Chapter".
3
Press Number buttons (0–9) to input the
number.
• If you input a wrong number, press CANCEL.
• Refer to the package supplied with the disc to
check the numbers.
4
Press ENTER.
• Playback starts.
• When you change the title, playback starts from
Chapter 1 of the selected title.
• Some discs may not work in the above operation.

Repeat playback

Title, Chapter, Track Playback
1
Press PLAY MODE during playback or stop
mode.
2
Press ENTER repeatedly to select "Chapter" or
"Title".
The unit automatically starts repeat playback after
finishing the current title or chapter.
Play Mode
Repeat : Off
• If you set the repeat mode during stop mode,
press PLAY to start Repeat playback.
3
Press PLAY MODE again to make the screen
disappear.
• Press PLAY to start Repeat playback.
• To resume normal playback, select Repeat
"Off" in step 2.
A-B Repeat Playback
A-B repeat playback allows you to repeat material
between two selected points.
1
Press REPEAT A-B during playback.
The start point is selected.
A
2
Press REPEAT A-B again.
The end point is selected. Playback starts at the
point that you selected. Playback stops at the end
point, returns to Point A automatically, then starts
again.
A B
To resume normal playback press REPEAT A-B
again.
" Off " appears on the screen.
NOTE:
• Some discs may not work with the repeat
operation.
• In A-B repeat mode, subtitles near point A or B may
not appear.
• During the A-B Repeat Playback the ANGLE
feature will not operate.
• You may not be able to set A-B Repeat, depending
on the scenes of the DVD.
• A-B Repeat does not work with an interactive DVD,
MP3/MPEG/WMA/JPEG-CD.

Marking desired scenes

The TV/DVD stores the points that you want to
watch again. You can resume playback from that
scene.
Marking the Scenes
1
Press MARKER during playback.
Marker 1
Marker 2
Marker 3
2
Select the blank Marker using
press ENTER at the desired scene.
Marker 1 0 0 2 7 5 4
Marker 2
Marker 3
• Up to 3 scenes can be selected.
• Repeat this procedure to set the other 2
scenes.
3
Press MARKER to remove this display.
Returning to the Scenes
1
Press MARKER during playback or stop mode.
Marker 1 0 0 2 7 5 4
Marker 2 0 1 1 6 2 5
Marker 3 0 2 0 8 3 1
2
Press or to select the Marker 1-3.
Marker 1 00 27 54
Marker 2 01 16 25
Marker 3 02 08 31
or , then
33