Advertisement
1. Introduction
Thank you for choosing the AI4S-192. This analog expansion board adds 4 analog inputs in
professional quality to RME's HDSPe AIO. Level adjustment, balanced circuit design, 116 dBA
SNR and highest suppression of PC-noise guarantee perfect sound quality.
2. Package Contents
Please ensure that all the following parts are included in the AI4S-192 AIO's packaging box:
• Analog Expansion Board
• 1 flat ribbon cable, 26 pins
• 1 set of nuts
• Manual, drill template
3. Hardware Requirements
The AI4S-192 AIO can be used with the HDSPe AIO and the HDSP 9632. No more than one
AI4S-192 AIO can be connected to each card.
4. Technical Specifications
• Resolution AD: 24 Bit
• Supported sample rates: 32 / 44.1 / 48 / 64 / 88.2 / 96 / 128 / 176.4 / 192 kHz
• Signal to Noise ratio (SNR): 113 dB RMS unweighted, 116 dBA @ 44.1 kHz
• THD: < -110 dB, < 0.00032 %
• THD+N: < -104 dB, < 0.00063 %
• Crosstalk: > 110 dB
• Frequency response AD @ 44.1 kHz, -0.5 dB: 5 Hz - 21.5 kHz
• Frequency response AD @ 96 kHz, -0.5 dB: 5 Hz – 45.5 kHz
• Frequency response AD @ 192 kHz, -1 dB: 5 Hz – 66.5 kHz
• Input: 4 x 1/4" TRS jack, servo balanced
• Input impedance: 10 kOhm
• Input sensitivity: Lo Gain, +4 dBu, -10 dBV
• Input level for 0 dBFS @ Lo Gain: +19 dBu
• Input level for 0 dBFS @ +4 dBu: +13 dBu
• Input level for 0 dBFS @ -10 dBV: +2 dBV
• Power supply via flat ribbon cable
•
Standard bracket, board dimensions 90 x 95 mm
User's Guide AI4S-192 AIO
3
Advertisement
