1 flat ribbon cable, 26 pins 1 Set of nuts Manual, drill template 3. Hardware Requirements The AI4S-192 can only be connected to the HDSP 9632. No more than one AI4S-192 can be connected to each HDSP 9632. 4. Technical Specifications Resolution AD: 24 Bit Signal to Noise ratio (SNR): 109 dB RMS unweighted, 111 dBA @ 44.1 kHz...
8. Re-connect the power cable and all other cables/connections. Connecting an AI4S-192 to a HDSP 9632 Both AI4S-192 and AO4S-192 have two flat cable connectors. The second connector allows to use an AI4S-192 together with an AO4S-192. User's Guide AI4S-192...
AI at a different place inside the computer using the supplied nuts. This re- quires to drill 4 holes into the housing. RME does not accept claims for damages of any kind when installing the AI in this way! Modifications to the housing should be done by qualified technicians only, and only after having removed all components from the housing (danger of short circuit by metal splinter etc).
Current driver version: W2k: 2.60 Although the contents of this User’s Guide have been thoroughly checked for errors, RME can not guarantee that it is correct throughout. RME does not accept responsibility for any misleading or incorrect information within this guide. Lending or copying any part of the guide or the RME drivers CD, or any commercial exploitation of these media without express written permission from RME Intelligent Audio Solutions is prohibited.
Page 7
Consult the dealer or an experienced radio/TV technician for help. In order for an installation of this product to maintain compliance with the limits for a Class B device, shielded cables must be used for the connection of any devices external to this prod- uct. User's Guide AI4S-192...