Using The Ipod Docking Station; Programming The Universal Remote Control - Cal Spas LTR20101000 Owner's Manual

40

Using the iPod Docking Station

To play an iPod from the docking station to the spa's stereo
system:
1. Place the iPod in the docking station.
2. Press the SOURCE button on the stereo until the display
shows AUX.
3. Play the iPod.
4. Adjust volume using the volume control in the docking
station.

Programming the Universal Remote Control

The Cal Spas universal remote has been pre-programmed to function with the entertainment system the spa
has been configured with. However, in case you need to reprogram the remote, use the device list below for
the programming code.
1. Turn on the device (TV, CD player, DVD player) with the manufacturer's remote control.
2. Press the button on the remote for the device you want to program (TV, CD, DVD, etc.)
3. Press and hold the SETUP button until the LED blinks twice.
4. Enter the device code. If you perform this procedure correctly, the LED will blink twice. If not, repeat
steps 2 and 3.
Device Manufacturer
Sony CDX-GT10M
Sony CDX-HS70MW
Samsung 42" plasma
(Galaxy spa only)
www.calspas.com
Device Code
Type
CD 1440
CD 1440
TV 1312
2010 Portable Spa
LTR20101000, Rev. C