GWireless LANH
Symptom
Cause
Cannot connect
• The settings of the SSID and
to network.
network key (WEP) are incorrect.
• The reception is poor and the
signals cannot be received.
• There are multiple networks and
the usable channels overlap.
• The router power is off.
Cannot achieve
• The encryption type on the router
network
is set to "WEP" or "TKIP".
connection using
WPS
the
button.
Played sound is
• There are multiple networks and
interrupted or
the usable channels overlap.
sound cannot be
played.
Countermeasure
Page
• Match the network settings with
18
this unit settings.
• Shorten the distance from the
–
wireless LAN's access point,
remove
any
obstacles
and
otherwise improve visibility, then
try reconnecting. Also install
away from microwave ovens
and the access points of other
networks.
• Set the access point's channel
–
settings away from the channels
used
for
other
networks.
Alternatively, connect using a
network cable.
• Turn on the router power.
–
• Set the encryption type to
17,
18
"None",
"WPA-PSK(AES)"
or
"WPA2-PSK(AES)"
before
establishing connection.
• Set the access point's channel
–
settings away from the channels
used
for
other
networks.
Alternatively, connect using a
network cable.
GAirPlayH
Symptom
Cause
The AirPlay
• This unit and the computer
icon
is not
or iPhone/iPod touch are not
displayed in
connected to the same network
iTunes or on
(LAN).
the iPhone/iPod
• iTunes or the iPhone/iPod touch
touch.
do not have firmware that
supports AirPlay installed.
No sound.
• This unit is not selected in the
screen that is displayed when
iTunes or the iPhone/iPod touch
is started.
GRemote controlH
Symptom
Cause
Set does not
• Batteries are worn.
work properly
• You are operating outside of the
when remote
specified range.
control operated.
• Obstacle between main unit and
remote control.
• The batteries are not inserted in
the proper direction, as indicated
by the polarity marks in the
battery compartment.
• The set's remote control sensor
is exposed to strong light (direct
sunlight, fluorescent light, etc.).
53
Countermeasure
Page
• Connect the computer or iPhone/
7
iPod touch to the same network
as this unit.
• Update to the latest firmware.
12
• Start iTunes or switch on the
35
iPhone/iPod touch, click the
AirPlay icon
in the displayed
screen, and select this unit.
Countermeasure
Page
• Replace with new batteries.
3
• Operate within the specified
3
range.
• Remove the obstacle.
–
• Insert
the
batteries
in
the
3
proper direction, following the
polarity marks in the battery
compartment.
• Move the set to a place in which
3
the remote control sensor will
not be exposed to strong light.