Installation; Unpacking - AEG 12710 VIT, 14710 VIT Instruction Booklet

Installation

Unpacking

All transit bolts and packing must be removed before using the appliance.
and remove the rear right-hand bolt and lay
the machine on its back, taking care not to
squash the hoses. This can be avoided by plac-
ing one of the corner packing pieces between
the machine and the floor.
Remove the polystyrene base and take off the
bottom panel by
unscrewing the
central screw.
Carefully slide out
the right poly-
thene bag.
Repeat the opera-
tion for the left
and central poly-
thene bags.
Re-fit the bottom
panel using the 4
screws supplied
with the door
hinges (in the plas-
tic bag) and the
previously removed
screw.
50
Using the supplied spanner, unscrew