Setting The Time Alarm - DAVIS Vantage Pro2 6312 Console Manual

Vantage Pro2 Station AlarmsVantage Pro2 Station Alarms
Variable
Barometric Pressure Trend
Evapotranspiration
Humidity, Inside
Humidity, Outside
Dew Point
Leaf Wetness
Rain
Storm
Rain Rate
Soil Moisture
Solar Radiation
Inside Temperature
Outside Temperature
Extra Temperature
Heat Index Temperature
THSW Index Temperature
Wind Chill Temperature
UV Radiation Index
UV Radiation MED
Wind Speed
Time & Date

Setting the Time Alarm

1. Press ALARM to enter alarm mode.
The ALARM and HIGHS icons appear.
2. Press 2ND, then press TIME, then press 2ND again, and then press ALARM.
The time field begins blinking.
3. Press the < and > keys to select hours, minutes, or AM/PM.
4. Press + and - keys to change the digit's value up and down.
5. Press DONE to exit Alarm Mode.
Storm Warning - uses trend value falling rate
Storm Clearing - uses trend value rising rate
ET Alarm - uses total ET for the day
High and Low
High and Low
High and Low
High and Low
Flash Flood Alarm - uses current 15 minute rainfall total
24 Hour Rain Alarm - uses current 24 hour rainfall total
Storm Alarm - uses current storm rainfall total
High
High and Low
High
High and Low
High and Low
High and Low
High
High
Low
High
High - uses the current total if variable has been reset
High
Yes - the alarm sounds for 1 minute.
Alarms
Alarm Mode
30