2.3 Paper Specifications; Recommended Paper; Printing Position - Citizen PPU-231 User Manual

2.3 Paper Specifications

2.3.1

Recommended Paper

• Type
• Paper width
• Paper thickness
• Roll diameter
• Printing surface
• Recommended paper
• Core
CAUTION:
1) Use of non-specified paper may cause irregularity of print density. If this is the case, use the DIP switch
to reset print density. (See 5. DIP SWITCH SETTING)
2) Do not paste the paper to the core.
3) If the paper comes in contact with a chemical or oil, it may discolor or lose a record.
4) Do not rub the paper surface strongly with a nail or hard metal. It may discolor.
5) Discoloring starts at about 70
2.3.2

Printing Position

: Thermal paper
: 80 + 0/- 1 mm
: 60 ∼ 85µm
: φ203 mm or less (When using PHU)
: Outside of the roll (Surface)
: TF50KS-E, E2C (Monochrome) made by NIPPON SEISHI or its equivalent
: φ25.4 mm (Inner diameter)
°C
. Watch out for effects of heat, humidity, light, and so on.
7
PPU-231 User's Manual
CITIZEN