Table of Contents
Advertisement
Operating Instructions
Problem
Remnants of detergent
are building up in the
detergent drawer.
The rinse water is
cloudy.
When pressing a pro-
gramme option button
the corresponding dis-
play does not light up.
Programme cycledis-
play flashes constantly.
38
Possible cause
Water tap is not fully
opened.
The inlet hose filter in the
coupling of the inlet hose at
the tap is blocked.
The cause is probably a de-
tergent with a high silicate
content.
The selected programme op-
tion cannot be combined
with the set programme.
Programme security is
switched On; the pro-
gramme selector has been
moved during the wash cy-
cle.
Remedy
Open water tap fully.
Close the water tap. Unscrew
the inlet pipe from water tap
and from the appliance and
clean the filter.
No negative influence on the
rinse results, use a liquid de-
tergent if necessary.
Make another selection.
Turn programme selector to
its original position (see
„Programme security").
Advertisement
Table of Contents
