Citizen BD2-1220 Command Reference Manual page 69

GS V m ......... (1)
GS V m n ..... (2)
[Function]
[Code]
[Range]
[Outline]
[Caution]
Cutting the paper
(1) <1D>H<56>H<m>
(2) <1D>H<56>H<m><n>
(1) 0 m 1, 48
(2) 65 m 66, 0
Performs the specified paper cutting.
m
0,48
1,49 Partial cut (Leaving a bridge area uncut)
65 Paper feed by "cut position + {n
Paper feed by "cut position + {n
66
pitch}"and partial cut (Leaving a bridge area uncut)
• In STANDARD MODE, this command only works when it is
entered at the beginning of a line.
For (1):
• A partial cut (Leaving a bridge area uncut) is executed.
For (2):
• If n = 0, the paper is fed to the cut position, and then cut. If n
0, the paper is fed by "n
past the cut position, and then cut.
• The basic calculation pitch is set by GS P.
The paper feed amount is calculated with the vertical basic
calculation pitch (y).
A fraction resulting from the calculation is corrected with the
minimum pitch of the mechanism, and the remainder is
omitted.
— 67 —
n 49
n 255
Function
Full cut
pitch}"and full cut
basic calculation pitch" inches
basic calculation
basic calculation