Receiving Data From An Sf/Csf/Nx Series Unit; To Connect A Pv Unit And An Sf/Csf/Nx Series Unit - Casio PV-250X User Manual

• Transferring data from the PV-200A/PV-250X/PV-400A/PV-450X to the
BN Unit causes all euro symbols to be replaced by spaces.
• The following shows the relationship between data when received by
the PV Unit from a BN Unit.
Mode
Contacts
Scheduler
Memo
• The Company entry of the PV Unit is equivalent to the Employer entry
of a BN Unit.

Receiving Data From an SF/CSF/NX Series Unit

This section describes how to set up and receive data from an SF/CSF/NX Series
Unit. Note that you cannot send data from a PV Unit to an SF/CSF/NX Series
Unit. In this configuration, you must set a number of communication parameters
for correct operation.

To connect a PV Unit and an SF/CSF/NX Series Unit

1. Make sure that the power of both units is turned off.
2. Set the PV Unit onto its cradle.
• Gently but firmly press down on the PV Unit to ensure that it is inserted
into the cradle as far as it will go.
3. Open the cover of the data communications jack of the SF/CSF/NX
Series Unit, and connect an optional SB-90 3-9 pin cable.
134
BN Unit
PERSONAL
BUSINESS
SCHEDULE
TO DO
REMINDER
MEMO
PV Unit
Personal
Business
Schedule
To Do
Reminder
Memo (Untitled 1)