Casio QV-R3 Memory Card Manual page 16

USING THE CAMERA WITH A COMPUTER
To connect the USB Cable
1.
Turn on the camera.
2.
Open the terminal panel cover and then use the
USB cable to connect the camera to the com-
puter.
USB cable (bundled)
USB port
Large connector (A)
3.
Import the images to the computer.
4.
After image data transfer is complete, discon-
nect the USB cable.
• For details, see "Terminating a USB Connection."
IMPORTANT!
• Be sure to read the applicable information in the user
• Do not leave the same image displayed on your com-
• Take care when connecting the USB cable to the cam-
Small connector
(Mini-B)
• Plug the USB cable into the ports securely as far as it
• The camera does not draw power over the USB cable.
• The optionally available CASIO QC-1U USB cable
• Never disconnect the USB cable while the PC is ac-
USB
• You can perform USB data communication while the
119
documentation that comes with your computer before
connecting the USB cable.
puter screen for a long time. Doing so can cause the
image to "burn in" on the screen.
era. The USB port and the cable plug are shaped for
proper positioning.
will go. Proper operation is not possible if connections
are not correct.
Be sure to connect the AC adaptor to the camera for
power.
cannot be used with this camera.
cessing camera memory (indicated by a flashing USB
lamp). Doing so can cause data to become corrupted.
camera is in a recording mode or in the Play Mode.