Samsung 8 series User Manual page 7

5 COMPONENT IN
– Connect component video cables (optional) to component connector (P
to corresponding component video out connectors on the DVD.
– If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD and connect the
DVD to component connector (P
– The P , P and Y connectors on your component devices DVD are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.
R B
– Connect RCA audio cables (optional) to [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio
out connectors on the DVD.
6 PC IN / PC/DVI AUDIO IN
– Connects to the video and audio output jacks on your PC.
If your PC supports an HDMI connection, you can connect this to the HDMI IN (DVI), ,  or  terminal.
N
If your PC supports a DVI connection, you can connect this to the HDMI IN (DVI) / PC/DVI AUDIO IN terminal.
N
7 HDMI IN (DVI), HDMI IN , HDMI IN , HDMI IN 
– Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)
– No additional Audio connection is needed for an HDMI to HDMI connection.
– When using an HDMI / DVI cable connection, you must use the HDMI IN (DVI) jack.
What is HDMI?
N
'High Definition Multimedia interface' allows the transmission of high definition digital video data and multiple channels of
digital audio.
The HDMI / DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied).
The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital
Copy Protection) coding feature installed, and supports multi - channel digital audio.
The TV may not output sound and pictures may be displayed with abnormal colour when DVD / Blu-ray player / Cable
N
Boxes / Satellite receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI
cable and there is no sound, connect the HDMI cable to the HDMI IN (DVI) jack and the audio cables to the DVI AUDIO
IN jacks on the back of the TV. If this happens, contact the company that provided the DVD / Blu-ray player / Cable Box /
Satellite receiver to confirm the HDMI version, then request a firmware update. HDMI cables that are not 1.3 may cause
annoying flicker or no screen display.
Supported modes for HDMI / DVI and Component.
N
HDMI / DVI 50Hz
HDMI / DVI 60Hz
Component
8 USB(HDD) / USB
– Connector for software upgrades and Media Play, etc.
For USB HDD, use the USB1 (HDD) port.
N
– You can connect to Samsung's network wirelessly using the 'Samsung Wireless LAN Adapter' (Sold separately).
9 DIGITAL AUDIO OUT (OPTICAL)
– Connects to a Digital Audio component.
When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack: Decrease the volume of the TV
N
and adjust the volume level with the system's volume control.
5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
N
0 SERVICE
– Connector for service only.
, P , Y) on your set.
R B
480i 480p 576i
X X X
X O O
O O O
English - 
, P , Y) on the rear of your set and the other ends
R B
576p 720p 1080i
O O O
X O O
O O O
1080p
O
O
O