LED TV Installation manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register Model Serial No.
SBB/STB. If the TV is in ONLINE mode, it stops receiving IR(Samsung remote) commands and acts according to interface protocol. Stand-Alone: If SBB/STB is not identified, the TV should be switched to STAND-ALONE mode with restricted operation.
Installing the LED TV Stand ............................5 y Viewing the Connection Panel ........................... 6 y TV Controller ................................8 y Samsung Smart Control ............................9 y Viewing the Remote Control ............................ 12 y Connecting the TV with SBB ........................... 13 y Connecting the Bathroom Speakers ........................
Accessories ✎ Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer. ✎ The items’ colour and shapes may vary depending on the model. y Smart Touch Control & Batteries (AA x 2) y Power Cord / Data Cable y Remote Control &...
Installing the LED TV Stand Stand Components When installing the stand, use the provided components and parts. ✎ The stand shape of product may vary depending on the model. x12 (M4 X L14) y Stand y Guide Stand (2EA) y Bracket Stand (2EA) y Screws ✎...
Viewing the Connection Panel ✎ Whenever you connect an external device to your TV, make sure that power on the unit is turned off. ✎ When connecting an external device, match the colour of the connection terminal to the cable. AV IN –...
HEADPHONE JACK: – Headphones may be connected to the headphone jack on your TV. While the headphones are connected, the sound from the built-in speakers is disabled. : Connect the cable to HP-ID and Headphone Jack simultaneously and connect it to separated Headphone Box. HP-ID See page 16.
The image is drawn by facing the front side of the TV. Remote control sensor When you use the Samsung Smart Control, the standby LED does not work (except the P button). Turn the TV on by pressing the controller in standby mode.
Samsung Smart Control. GUIDE: Displays the digital channel The pointer on the screen moves in the broadcasting schedule. direction and as much as the Samsung CH.LIST: Press and hold to launch the Smart Control is moved. Press the CH.LIST.
- Samsung Smart Control can only be paired to a single TV. Point Samsung Smart Control at the remote control sensor of the TV and press the TV button to turn the TV on. - Remote control receiver’s location may vary depending on the model.
<Low battery Alarm Icon> Using the TV by Moving the Samsung Smart Control The Samsung Smart Control has a motion sensor (gyro sensor) that allows you to easily control the TV by holding and moving the Samsung Smart Control. After placing a finger on the touchpad, a pointer appears on the screen. Hold and move the Samsung Smart Control. The pointer moves the same way the Samsung Smart Control is moved.
Viewing the Remote Control Power Channel ✎ This remote control has Braille points on the , and buttons and can be used by visually Volume impaired persons. Turns the TV on and off. Display and select available video sources. Have direct access to channels GUIDE Electronic Programme Guide (EPG) display.
Installing the batteries (Battery size: AAA) NOTE ✎ • Use the remote control within 7m of the TV. • Bright lights may affect the performance of the remote control. Avoid using the remote control near special fluorescent lights or neon signs. Connecting the TV with SBB TV Rear Panel ETH MODEM...
List of Vendors and Compatible Data Cables Supplied with the TV ¦ y Confirm that you are using the correct data cable for your vendor. Refer to the code label on the data cables. English...
Connecting the Bathroom Speakers You can connect the Bathroom Speakers using the following method. Connecting through the Variable Output (available without an external amplifier) ¦ TV Rear Panel Speaker VOL+ Volume Control Box VOL- 1. Connect the port of the TV to the Bathroom Wall Speakers of the hotel. VARIABLE AUDIO OUT Speaker + Speaker -...
Audio Loop In ¦ An additional Headphone Box can be installed on a bed or business desk for added convenience. The installation procedures are given below. y Detailed Drawing of the Headphone Box. TV Rear Panel Headphone Box HEADPHON BOX Shield wire TV Headphones jack Red Wire (Audio-R)
Connecting the MediaHub HD Output to any external source connected to MediaHub HD on the hotel desk. MediaHub HD Rear TV Rear Panel HDMI RS/232 1 RS-232 Data Cable 2 HDMI cable 1. Connect the port of the TV and the RS/232 port of the MediaHub HD. 2.
5. Connect the port of the TV and the RS/232 port of the RJP. ✎ The RJP (Remote Jack Pack) compatible with this Samsung TV is TeleAdapt TA-7610, TA-7650 (HD) and TA-7660 (HD Plus). y RJP (Remote Jack Pack): RJP stands for Remote Jack Pack. The RJP is a hardware module that has different Audio Video inputs (A/V, Audio, PC and HDMI) and corresponding outputs.
y The RJP can be returned to the factory default settings by pressing the A/V and HDMI buttons simultaneously for 10 seconds. All LEDs blink 5 times to acknowledge that this has been finished. y The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light pollution in the hotel room. The LEDs that were turned off will turn on again if the guest touches any of the buttons and the 5 minute timer will restart.
Connecting to a COMMON INTERFACE slot (Your TV viewing Card Slot) ✎ Scenario 1: When no inputs are connected. Attaching the CI Card Adapter Attach the adapter as shown side. ✎ To install the CI CARD Adapter, please remove the sticker attached to the TV. To connect the CI CARD Adapter, follow these steps.
• Interactive mode : TV works with an SI STB or SBB. Mode • Stand-alone mode : TV works alone, without an SI STB or SBB. • Interactive mode : Samsung / OCC / MTI / Nstreams / Enseo / Cardinal / Guestek / SI Vendor SI Vendor Seachange / MDC / Innvne • Standalone mode : Smoovie...
Hotel TV Function Description Category Item initial value When there is a mismatch between the data in the channel map and the transmitted data , the TV autotunes the channels to restore the data/parameters in the channel map. • ON: When Channel Rescan Message is ON, The OSD showing that the channels Channel Rescan Message are being rescanned will be displayed to Hotel Guests.
Hospitality Logo DL • BMP or AVI files only. • Max file size : BMP - 960 X 540. AVI - 30MB. • The file can only be named samsung.bmp or samsung.avi. Logo Display Time Set the logo display time (3/5/7 Seconds).
Hotel TV Function Description Category Item initial value Network Setup Set an IP address to establish an Internet connection. Network SmartHub Model Setting Set SmartHub Model. SmartHub Setting Set up SmartHub. Widget Mode Widget Mode ON/OFF. Solution Type Vendor Server Select type of solution (Vender Server/ SINC Server). Server URL Setting Set server URL.
Welcome Message ¦ The welcome message is used to display custom messages on the TV every time TV is turned on by a Guest in Hotel room. – Welcome message settings are found in the Hotel Option Menu. – Welcome message should be ON in order to display the message on power-on. Hospitality Mode Standalone Widget Soulution...
Logo File Format – The TV supports only BMP and AVI format. – The file name must be samsung.bmp or samsung.avi. – The maximum resolution of the BMP format is 1280 x 720. – The maximum file size for AVI format is 50MB.
USB Cloning ¦ USB Cloning is used to download user-configured settings (Picture, Sound, Input, Channel, Setup, and Hotel Setup) from one TV set and upload them to other TV sets. All the user-defined settings from the TV (Master Set) can be copied to the USB device. y Cloning from TV to USB: This copies stored data from the TV set to the USB device.
Setting Auto Initialize ¦ When you clone settings from one TV to another, you clone both the guest side menu and hotel side menu settings: Picture, Sound, Input, Channel, Setup, and Hotel Setup). This lets you set nearly all of the menu values on your hospitality TVs to the same, standard settings.
Plug & Play ¦ Hotel Plug & Play automatically performs Hotel mode selection, Country Setup, Clock Setup and Picture mode Setup. – Hotel Plug & Play is available only one time when power is first turned ON. – This is available after first setting up the TV and transferring Clone TV data to a USB drive. –...
– When Standalone Plug & Play is selected from “Easy Set Up” OSD, “Select Menu Language” OSD is displayed. – Initial Highlight : English – Display time: OSD timeout and operation are the same as Samsung's consumer TV models. – If the button is pressed, “Select Area”...
Multi Code Remocon ¦ Multi Code Remocon is a special transmitter which is designed to control each TV with one remote. This is useful where there is more than one TV in a location, such as in a hospital the set ID number is displayed in the source osd.
CH Bank Editor (Smoovie TV Only) ¦ Channel Bank Editor edits channels, with 3 different Bank Options. Depending on the Bank card, there are specific channels Hotel customers can enjoy. Setting the CH Bank Editor under Stand-alone Mode 1. Enter the Hotel Standalone menu by “MUTE+1+1+9+Enter” 2.
Channel Editor ¦ Channel Editor edits channel number a and name. – Use Channel Editor to sort the channels as user-desired channel numbers. Hospitality Mode Standalone Widget Soulution SI Vendor Service Power On Channel Menu OSD Clock Music Mode Remote Jack Pack Channel Editor External Source Bathroom Speaker...
Smovie TV used( Satellite ) Mixed Channel Map On (Satellite and Air or Cable both Only Satellite used Step usedused) If the tv starts with Hotel P&P If P&P already done If the tv starts with Hotel P&P If P&P already done Do the P&P except channel Do P&P all: Air or Cable auto Enter Hotel menu...
How to use Schedule Viewing in Channel List (digital channels only) When you set the Schedule Viewing in Channel List, you can only set the programme in Programme View. 1. Press the button, then select a desired digital channel. CH LIST 2.
My Channel ¦ Determines the country and genre for the channels provided by the hotel, and if the user selects a country and genre, shows the corresponding channels. y You must select the country first, or you can not set a genre. y If you select the genre without adding any channels, the channel list displays all of the available channels.
✎ Notes This section describes the layout of the Front UI that appears when the TV is turned on. (Factory Mode > Genre Mode: Enable) The genre is a sub-list for each country. The broadcast screen that was being displayed the last memorial channel. –...
Highlight Interaction [Country Items] • This page is only to indicate possible interactions. It may not be exactly identical to actual screens. ✎ Notes Users can navigate the items in each country & genre list by pressing the up or down remote control keys. Circular navigation is supported. My Channel My Channel Current status : All Country/Sports Current status : All Country/Sports Country Genre...
Highlight Interaction [Default Genre] • This page is only to indicate possible interactions. It may not be exactly identical to actual screens. My Channel My Channel Current status : All Country/Sports Current status : All Country/Sports Country Genre Country Genre ▲ ▲ ENTER / RIGHT All Country All Country Austria News Austria News Belgium (Dutch) Radio Belgium (Dutch) Radio Belgium (French) Entertainment...
Mode Change Interaction 1 (1/2) • This page is only to indicate possible interactions. It may not be exactly identical to actual screens. My Channel My Channel Current status : All Country/Sports Current status : All Country/Sports Country Genre Country Genre ▲ ▲ DOWN All Country All Country Austria News Austria News Belgium (Dutch) Radio Belgium (Dutch) Entertainment Belgium (French) Entertainment...
Mode Change Interaction 1 (2/2) • This page is only to indicate possible interactions. It may not be exactly identical to actual screens. My Channel Current status : All Country/Sports Country Genre ▲ ENTER All Country News Austria Belgium (Dutch) Entertainment Genre Mode change to Austria/News. Info Belgium (French) Hotel Czech France Germany ▼ Navigation Help Area The genre mode change complete message is displayed.
Mode Change Interaction 2 (1/2) • This page is only to indicate possible interactions. It may not be exactly identical to actual screens. My Channel My Channel Current status : All Country/Sports Current status : All Country/Sports Country Genre Country Genre ▲ ▲ DOWN All Country All Country Austria News Austria News Belgium (Dutch) Entertainment Belgium (Dutch) Entertainment Belgium (French) Sports...
Power On Scenario [Last Memory] • This page is only to indicate possible interactions. It may not be exactly identical to actual screens. POWER Current Status : Austria / News Power Off Current Genre Mode : Austria / News POWER My Channel Current status : All Country/Sports Country Genre ▲ All Country Austria News Belgium (Dutch) Entertainment Belgium (French) Hotel Czech...
Genre Editor: This configures the genres of each of the hotel TV channels. y This can be used through the Hotel Menu (Factory). y Supported genres include News, Radio, Entertainment, Sports and Hotel. y More than one genre can be selected for each channel at the same time. Country Editor (Channel Editor): This is the editor that configures the country for each of the hotel TV channels.
Elements Name Description When the user enters this screen, the currently selected default item is highlighted. The Country Icon + Category Name are provided. (If the highlight is in the Main Frame, only the icon is displayed.) Moving the highlight –...
✎ Notes This is a definition of the Tools menu in the Left Frame Category. Only the Info item for each Register/Country is provided. Elements Category Tools menu Descriptions Registered Channels. The number of channels of each Registered, Country Information country.
✎ Notes This is the component for when there are no channels registered to the country category. Elements Description Description The message is displayed when the currently selected country does not contain any items. Main Frame [Channel Browser] English...
Key Guide Button Action Nav. Help CH UP/DOWN Moves the page. Page ENTER Selects or enters the corresponding Channel Browser area. Select Returns to the previous step (Factory Mode). Return RETURN UP/DOWN Moves the highlight up or down. (No Guide) RIGHT Moves the highlight to the Channel Browser area.
Channel Common Elements [+ Icon-method] Channel list representation rules Standard Item Construction • Check Box + Status Icon + Digital Channel Number + Channel Name Digital channels – Channel number representation format: ###-### (The channel number is represented by ‘-’.) ATSC • Check Box + Analog Icon + Analog Channel Number + Channel Name Analog channels – Channel number representation format: ### (‘-’ is not used to represent analog channel numbers.) • Check Box + Status Icon + Digital Channel Number + Channel Name Digital channels...
Add to Countries / Edit Countries (1/2) • Channel Manager > Browser > Tools > Add to Countries Key Guide Button Action Nav. Help Selects the highlighted item. Enter ENTER Cancels and returns to the previous screen (Tools). Return RETURN UP/DOWN Moves the highlight over country items. Move LEFT/RIGHT Moves the highlight. Move INFO TOOLS...
Elements Name Description • If there are no channels that have been registered to the country list Add to Countries in the selected channels, “Add to Countries” is displayed as the title. Window • A check box is displayed depending on whether the country that was selected when entering the screen is registered or not. Guide • The number of the selected channel or the channel name. - The channel name is displayed when one channel has been Selection Info selected: Selected channel: NNNN-NNN ABC - The number of selected channels is displayed when more than one...
✎ Notes This is the definition for Edit Countries. The highlighted channel item or more than one selected channel item is added or deleted from the Country category. Timeout (60 sec) Elements Name Description If there is a registered channel among the selected channels, Edit Countries is displayed as the title.
Elements Name Description Both the numeric keys and the Up/Down keys are supported. – Selected Channel: Shows the currently selected channel name. – Number: Shows the new channel number. Edit Channel (The currently allocated channel name is also displayed.) Number Window –...
Key Guide Button Action Nav. Help If a user presses the button, the channel number is initialized. Reset ENTER Applies the changes and closes the window. Enter RETURN Cancels or returns to the previous screen (Tools). Return Changes the channel number of the selected channel. Adjust 0~9T Enters a digit.
Edit Channel Name • Channel Manager > Browser > Tools > Edit Channel Name Key Guide Button Action Nav. Help GREEN Saves the changes and returns to the Channel Manager. Done ENTER Saves the channel name and moves the cursor to the next field. Enter RETURN Cancels and returns to the previous screen (Tools). Return U/D/L/R Navigates on the keyboard.
Tools [Edit Mode] Edit Mode Content Highlight (when the number of the checked item is 0 or 1) When there is more than one checked item. Add to Countries Edit Countries (when an already-registered item is checked.) Add to Countries Channel Name Edit Edit Countries (when an already-registered item is checked.) Edit Channel Number...
CH Banner [when a channel number is allocated to an external input] ✎ Notes The TV channel banner specifications are applied. When there is an unsupported item or there is no corresponding information, the item values are not displayed. The channel name is represented as the ‘external input name’. Elements Name Description...
• Samsung Sound-Bars and Hospitality TV – Use Samsung Sound-Bars and hospitality TVs support the ARC feature in HDMI. If you connect a compatible Samsung Sound-Bar to a compatible Samsung hospitality TV using a single HDMI cable, guests can listen to theTV’s sound through the Sound-Bar.
For detailed information about installing the wall mount, see the instructions provided with the wall mount. We recommend you contact a technician for assistance when installing the wall mount bracket. We do not advise you to do it yourself. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own.
Securing the TV to the Wall Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang on or destabilize the TV. Doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided in the Safety Flyer included with your TV.
Anti-theft Kensington Lock The Kensington Lock is not supplied by Samsung. It is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration, depending on the manufacturer. Refer to the manual provided with the Kensington Lock for additional information on proper use.
Specifications Display Resolution 1920 x 1080 Environmental Considerations Operating Temperature 10°C to 40°C (50°F to 104°F) Operating Humidity 10% to 80%, non-condensing Storage Temperature -20°C to 45°C (-4°F to 113°F) Storage Humidity 5% to 95%, non-condensing Model Name HG40EC890 HG46EC890 Screen Size (Diagonal) 40 inches 46 inches...
y Base Stand detail HG40EC890 / HG46EC890 / HG55EC890 / HG60EC890 (Unit: mm) HG40EC890 897.6 204.5 143.4 1021.8 208.8 158.7 HG46EC890 1213.6 267.7 162.7 HG55EC890 HG60EC890 1350.6 267.7 162.7 NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Country Web Site Customer Care Centre AUSTRIA 0800 - SAMSUNG (0800 - 7267864) www.samsung.com/at/support BELGIUM 02-201-24-18 www.samsung.com/be/support (Dutch) www.samsung.com/be_fr/support (French)