Samsung 8 series User Manual page 19

Screen Mode → 16:9 / Wide Zoom / Zoom / 4:3 (New Zealand, Singapore only)

When setting the picture size to Auto Wide in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS
(Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is
intended for users to select it.
● :: Sets the picture to 16:9 wide mode.
● Wide Zoom: Magnify the size of the picture more than 4:3.
● Zoom: Magnify the size of the picture vertically on screen.
● :: Sets the picture to 4:3 normal mode.
This function is available in Auto Wide mode.
N
This function is not available in PC, Component or HDMI mode.
N
Digital NR → Off / Low / Medium / High / Auto

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static
and ghosting that may appear on the screen.
When the signal is weak, select one of the other options until the best picture is displayed.
N
HDMI Black Level → Normal / Low

You can directly select the black level on the screen to adjust the screen depth.
This function is active only when the external input connects to HDMI (RGB signals).
N
Film Mode → Off / Auto 1 / Auto 2

The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
Film Mode is supported in TV, AV, COMPONENT(480i / 1080i) and HDMI(480i / 1080i).
N
200Hz Motion Plus → Off / Clear / Standard / Smooth / Custom / Demo

Removes drag from fast scenes with a lot of movement to provide a clearer picture.
This function is not available in PC mode.
N
If you enable 200Hz Motion Plus, noise may appear on the screen. If this occurs, set 200Hz Motion Plus to off or select one of
the other options.
● Off: Switches 200Hz Motion Plus off.
● Clear: Sets 200Hz Motion Plus to minimum.
● Standard: Sets 200Hz Motion Plus to medium.
● Smooth: Sets 200Hz Motion Plus to maximum.
● Custom: Adjusts the blur and judder reduction level to suit your preference.
– Blur Reduction: Adjusts the blur reduction level in video sources.
– Judder Reduction: Adjusts the judder reduction level in video sources with film signals.
– Reset: Reset the custom settings.
● Demo: Displays the difference between 200Hz Motion Plus on and off modes.
Blue Only Mode → Off / On

This function is for AV device measurement experts. This function displays the blue signal only by removing the red and green
signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Colour and Tint of video equipment such
as DVD players, Home Theatres, etc. Using this function, you can adjust the Colour and Tint to preferred values appropriate to
the signal level of each video device using the Red / Green / Blue / Cyan / Magenta / Yellow Colour Bar Patterns, without using an
additional Blue Filter.
Blue Only Mode is available when the picture mode is set to Movie or Standard.
N
Picture Reset → Reset Picture Mode / Cancel
❑
Resets all picture settings to the default values.
Reset Picture Mode: Current picture values return to default settings.
N
English -