For warranty registration please visit the rolls web site at www.rolls.com. MX34c LiveMix 15 VDC CHANNEL 1 CHANNEL 2 STEREO POWER INPUTS OUTPUT LEVEL LINE www.rolls.com LiveMix Two Channel Stereo MX34c Microphone Mixer/ Headset Mixer QUICK START ROLLS CORPORATION OPERATION GUIDE...
Page 2
DC Power Jack: (5.5 X 2.1 mm tip negative) 2. Please visit our web site at www.rolls.com, click on the Register Your Warranty Here Output connectors: 3.5mm stereo main out text and follow the instructions to register your MX34c.
Page 3
Follow the silk screening of the unit for switch orientation. POWER: Button applies power to the MX34c. 15 VDC jack: For connection to the Rolls PS27 15 VDC power supply. BATTERY INSTALLATION: To replace the 9 V alkaline batteries, fi rst carefully press in and up on the door to release the battery compartment.
Page 4
Mic Level controls until you achieve If you wish to use AC power for the MX34c, connect the Rolls PS27 12VDC desired levels. Adjust each Pan control to place the signal in the stereo fi eld.
Need help?
Do you have a question about the MX34c LiveMix and is the answer not in the manual?
Questions and answers