Oracle 5.0 Reference Manual page 1473

Replication and Binary Logging Options and Variables
•
--master-connect-retry=seconds
Command-Line Format
Option-File Format
Deprecated
The number of seconds that the slave thread sleeps before trying to reconnect to the master in
case the master goes down or the connection is lost. The value in the
precedence if it can be read. If not set, the default is 60. Connection retries are not invoked
until the slave times out reading data from the master according to the value of
[1462]. The number of reconnection attempts is limited by the
timeout
[1454] option.
count
•
--master-host=host_name
Command-Line Format
Option-File Format
Deprecated
The host name or IP address of the master replication server. The value in
precedence if it can be read. If no master host is specified, the slave thread does not start.
•
--master-info-file=file_name
Command-Line Format
Option-File Format
The name to use for the file in which the slave records information about the master. The default
name is
master.info
Section 16.2.2.2, "Slave Status
•
--master-password=password
Command-Line Format
Option-File Format
Deprecated
The password of the account that the slave thread uses for authentication when it connects to the
master. The value in the
password is assumed.
•
--master-port=port_number
[1453]
--master-connect-retry=#
master-connect-retry
5.1.17
Permitted Values
Type
numeric
Default
60
[1453]
--master-host=name
master-host
5.1.17
Permitted Values
Type
string
[1453]
--master-info-file=file_name
master-info-file=file_name
Permitted Values
Type
file name
Default
master.info
in the data directory. For information about the format of this file, see
Logs".
[1453]
--master-password=name
master-password
5.1.17
Permitted Values
Type
string
file takes precedence if it can be read. If not set, an empty
master.info
1453
[1453]
file takes
master.info
--slave-net-
--master-retry-
takes
master.info