Airlink101 Raven EDGE/GPRS User Manual page 85

AT Commands: PPP/Ethernet
Raven EDGE/GPRS for Cingular - User Guide, version 2.31
d.d.d.d=IP Address
*HOSTPRIVMODE=n
Set or query whether a private or public (network) IP is to be used when the Host initiates a
EDGE/GPRS connection to the modem.
n=0 : Public (network) IP Mode: When the Host initiates a PPP connection, the host will be given the
network IP address that was obtained from Cingular while registering on the network. If the network
issues a new IP address, the
and has to be re-initiated. (default).
n=1 : Private IP Mode: When the Host initiates a
address specified in *HOSTPRIVIP. The modem will then perform 1 to 1 NAT-like address translation,
which shields the Host from network IP changes.
*HOSTPW=string
Host Password forPAP or CHAP.
string=password
*HOSTUID=string
Host User ID forPAP or CHAP.
string=user id (up to 64 bytes)
EDGE/GPRS
connection will be closed (since the IP address has changed)
EDGE/GPRS
connection, the host will be given the IP
80