Trap Destination; Snmp Mib Definition For Airlink - Airlink101 Raven EDGE/GPRS User Manual

Table of Contents

Advertisement

Simple Network Management Protocol (SNMP)
Raven EDGE/GPRS for Cingular - User Guide, version 2.31
Wireless Ace: Changing the Raven Password - Menu Option
FIGURE 3.
The current password will be pre-entered. As you type the new password and confirm it, the char-
acters you type will be obscured by "x". For the password, you can use numbers, letters, and/or
punctuation.
The password is case sensitive.
Caution:
"drowssaP" is not the same as "drowssap".

Trap Destination

*SNMPTRAPDEST needs to be set with the destination IP and port. If either are set to zero or
empty, SNMP traps are disabled.
Wireless Ace: *SNMPPORT
FIGURE 4.
Traps are sent out according to the SNMP security level (i.e. if the security
Note:
level is 2, traps will be authenticated and encrypted). Currently, the only trap sup-
ported is LinkUp.

SNMP MIB Definition for AirLink

AIRLINK-MIB DEFINITIONS ::= BEGIN
IMPORTS
ObjectName FROM SNMPv2-SMI
MODULE-COMPLIANCE FROM SNMPv2-CONF;
org OBJECT IDENTIFIER ::= { iso 3 }
dod OBJECT IDENTIFIER ::= { org 6 }
110

Advertisement

Table of Contents
loading

Table of Contents