Casio CFX-9850G PLUS Basic Operation Gude page 18

1 - 4
Variable Data (VARS) Menu
k k k k k GRPH — Recalling Graph Functions
Selecting {GRPH} from the VARS menu displays the graph function recall menu.
P.156
k k k k k DYNA — Recalling Dynamic Graph Set Up Data
Selecting {DYNA} from the VARS menu displays the Dynamic Graph set up data
recall menu.
P.185
k k k k k TABL — Recalling Table & Graph Set Up and Content Data
Selecting {TABL} from the VARS menu displays the Table & Graph set up and
content data recall menu.
P.207
30
• {Y}/{r} ... {rectangular coordinate or inequality function}/{polar coordinate
function}
• {Xt}/{Yt} ... parametric graph function {Xt}/{Yt}
• {X} ... {X=constant graph function}
(Press these keys before inputting a value to specify a storage area.)
Example To recall and draw the graph for the rectangular coordinate
function
Use the following View Window parameters to draw the graph.
Xmin
Xmax = 5
Xscale = 1
!4(Sketch)5(GRPH)1(Y=)
J4(GRPH)1(Y)cw
• {Strt}/{End}/{Pitch} ... {coefficient range start value}/{coefficient range end
value}/{coefficient value increment}
• {Strt}/{End}/{Pitch} ... {table range start value}/{table range end value}/{table
value increment}
• {Reslt} ... {matrix of table contents}
• The Reslt item appears for function key 4 only when the above menu is
displayed in the RUN or PRGM Mode.
y x 2
= 2 – 3, which is stored in storage area Y2
= –5 Ymin
Ymax = 5
Yscale = 1
= –5