Casio CFX-9850G PLUS Graphing Manual page 3

8-2 View Window (V-Window) Settings
Use the View Window to specify the range of the
spacing between the increments on each axis. You should always set the View
Window parameters you want to use before drawing a graph.
1. Press !3(V·Window) to display
P.115
P.116
The nearby illustration shows the meaning
of each of these parameters.
2. Input a value for a parameter and press w. The calculator automatically
the View Window.
X min ............ Minimum x-axis value
X max ........... Maximum
X scale ......... Spacing of
Y min ............ Minimum
Y max ........... Maximum
Y scale .......... Spacing of
• {INIT}/{TRIG}/{STD} ... View Window {initial settings}/{initial settings using
specified angle unit}/{standardized settings}
• {STO}/{RCL} ... View Window setting {store}/{recall}
selects the next parameter for input.
• You can also select a parameter using the c and f keys.
• There are actually nine View Window parameters. The remaining three
parameters appear on the display when you move the highlighting down past
the Y scale parameter by inputting values and pressing c.
T, θ min .......... T, θ minimum values
T, θ max ......... T, θ maximum values
T, θ pitch ........ T, θ pitch
x
-and
x
-axis value
x
-axis increments
y
-axis value
y
-axis value
y
-axis increments
y
-axes, and to set the
Y max
X min
X scale
Y scale
Y min
x y
( , )
X max
113