Table of Contents
Advertisement
When the following cautionary terms are used in this manual, these definitions apply:
WARNING: Electrical hazard! Misuse or failure to follow instructions properly may
result in personal injury or death!
CAUTION: No risk or personal injury; however, misuse or failure to follow
instructions may result in damage to equipment.
NOTE:
No risk of personal injury or equipment damage; however, misuse or
failure to follow instructions may prevent proper performance of the
equipment.
This section describes the basic specifications of the SLP-98 at the time of printing. Specifications
are subject to change without notice or obligation.
DIMENSIONS:
WEIGHT:
CIRCUIT:
INPUT IMPEDANCE: 47,000 ohms phono section with user option on lower resistance
OUTPUT IMPEDANCE:
GAIN:
RIAA CURVE:
SIGNAL/NOISE RATIO:
RESISTORS:
CAPACITORS:
POWER TRANSFORMER: 200% duty cycle on all transformers enclosed in separate power
TUBES:
SPECIFICATIONS
1.2 Specifications
12-1/2 W x 5" H x 12" D
22 lbs.
Class A Triode
800 ohms
1.2 millivolt input = 1 volt output phono stage = 43dB
110 millivolt input = 1 volt output line stage = 20dB
1,000Hz = 0dB
20Hz = +20dB
20,000Hz = 20.5dB
-88dB
1% metal film
Polystyrene and polypropylene
pack
8 total premium tubes
2-6SN7 buffer cathode followers
2
Advertisement
Table of Contents
