Warranty Card; Physical Placement; Power Requirements; Speaker Cables - Cary Audio Design CAD-805 Anniversary Edition Setup And Operation Manual

Warranty Card

IN THE USA: If you are the original purchaser of a new unit from an AUTHORIZED CARY AUDIO
DESIGN DEALER, please fill out the enclosed warranty registration card and return it within 15
days of purchase or register online at www.caryaudio.com. Cary Audio Design suggests that you
keep your original packing cartons in case you need to ship the amps. Warranty restrictions
apply. Consult the warranty section of this manual for details. Keep a copy of your original sales
receipt for proof of purchase if you need service during the warranty period; we will require a
copy to validate the warranty. The warranty is for the original purchaser only and does not
transfer to any subsequent owner.
OUTSIDE THE USA: Your local Authorized Cary Audio Design Distributor will make his own
warranty policy for your country. Please check with them for the terms of warranty for your
new amplifier.

Physical Placement

The CAD-805 Anniversary Edition is designed for use in homes. It must be protected from the
elements and temperature extremes. For example, avoid placing the unit in extremely hot
locations such as near radiators or other heating units. Its location among the user's audio
components is not critical; however, certain precautions must be taken. Avoid moisture, direct
sunlight, and dusty areas.

Power Requirements

The CAD-805 Anniversary Edition is designed to operate from house current AC mains. The
design voltage is 117 Volts AC at 50/60Hz (Foreign units 234 Volts AC at 50/60Hz).

Speaker Cables

The speaker cables from the output posts of the CAD-805 Anniversary Edition to the speaker
system can be any length that your setup requires. Select speaker cables of sufficient size to
preserve the outstanding performance capabilities and sound quality of your new power
amplifiers.
Heavy duty #14 gauge wire is suitable for distances up to 15 feet; #10 gauge is good for 25-30
feet. Most audio dealers have high performance speaker cable in stock for this purpose. We
strongly urge you to try several types to find the best ones for your combination of components
and speakers.

Interconnect Cables

Signal input connection is made via the RCA input jack on the rear of the amplifier located next
to the output binding posts. The input interconnect cables from the output of the preamplifier
can be any length your installation requires. A shielded high quality interconnect cable is
important to reduce chances for hum or interference. Ask your Authorized Cary Audio Design
.
audio dealer for advice
Page 4