Using The Cooker Hood - AEG 8490 D Operating And Installation Instructions

Using the cooker hood

The control panel
T1: Main switch on/off (Activating and deactivating the stand-by mode)
T2: Sensor switch enable/disable
T3: Lamps on/off
D1: Filter saturation indicator
D2: Motor speed display 1-2-3-P (intensive)
D1-D2: Minute count down display (delayed switch off)
T4: Motor speed
T5: Intensive speed on/off
T6: Switch for delayed switch off
SENSOR: Display for enabled sensor switch
Fig. 2
Function at displayed "SENSOR"
If the hand is moved over the sensor or the knob T4 is pressed, the light
is switched on and the motor starts to run on second speed.
Speed changes can be made with the knobs T4/T5
If the hand is again mowed over the sensor, the light and motor is
switched off
If, when stand-by mode is activated, the knob T5 is pressed, the
intensive speed is started and the light is switched on.
Function when "SENSOR" is not displayed
By pressing the knob T4, the lamps are switched on and the motor
starts on second speed
Speed changes can be made with the knobs T4/T5
4