Other Functions; Sound Control; Selecting Surround Sound; Selecting Digital Sound Effects - Magnavox MRD120 User Manual

Sound Control

IMPORTANT!
For proper surround sound, make
sure the speakers and subwoofer are
connected (see page 9.)

Selecting surround sound

Press SURROUND to select
multichannel surround or stereo mode.
The availability of the various surround
sound modes depends on the number of
speakers used and the sound available on
the disc.
The center and surround speakers
operate only in Multi-channel surround
mode.
The available output modes for multi-
channel include: Dolby Digital, Dolby Pro
Logic or Dolby Pro Logic II surround
sound.
Stereo broadcasts or recordings will
produce some surround channel effects
when played in a surround mode.
However, monaural (single channel
sound) sources will not produce any
sound from the rear speakers.

Selecting digital sound effects

Select a preset digital sound effects that
matches your disc's content or that
optimizes the sound of the musical style
you are playing.
Press SOUND to select the available
sound effect.
When playing movie discs, you can select:
CONCERT, DRAMA, ACTION or SCI-FI.
When playing music discs or while in
TV/AV, TUNER or AUX mode, you can
select: ROCK, DIGITAL, CLASSIC or
JAZZ.
Helpful Hint:
– For flat sound output, select CONCERT or
CLASSIC.
001-037-MRD120-37-Eng

Volume control

Adjust VOLUME control (or press
VOL +/-on the remote) to increase
or decrease the volume level.
"VOL XX" appears. "XX" denotes the
volume level.
To listen through the headphones
Connect the headphones plug to the
PHONES socket at the front of the
DVD system.
The speakers will be mute.
To turn off the volume temporarily
Press MUTE.
Playback will continue without sound
and "MUTE" appears.
To restore the volume, press MUTE
again or increase the volume level.
Dimming system's display
screen
In any active mode, press DIM to select
desired brightness : HIGH, MID or LOW.
31

Other Functions

8239 300 30533
18/03/2004, 02:20 PM
31