Changing Tuning Grid; Other Functions; Setting The Sleep Timer - Magnavox MRD120 User Manual

Tuner Operations

Changing tuning grid

(not available for all versions)
In some countries, the frequency step
between adjacent channels in the MW
band is 9 kHz (10 kHz in some areas).
The preset frequency step in the factory
is 9 kHz.
IMPORTANT!
Changing the tuning grid will erase
all previously stored preset radio
stations.
Press and hold down PLAY/PAUSE ÉÅ
button on front panel for more than five
seconds.
The display will show "GRID 9" or
"GRID 10".
Helpful Hints:
– GRID 9 and GRID 10 indicate that the
tuning grid is in step of 9 kHz and 10 kHz
respectively.
– The FM tuning grid also will be changed
from 50 kHz to 100 kHz or vice versa.

Other Functions

Setting the Sleep Timer

The sleep timer enables the system to
switch to standby mode automatically at a
preset time.
Press SLEEP repeatedly until it reaches
the desired preset turn-off time.
The selections are as follows (time in
minutes):
15 ™ 30 ™ 45 ™ 60 ™ 90 ™ 120
™ OFF ™ 15 ...
" " icon will show on the display,
SLEEP
except if "OFF" is selected.
To check or change the setting
Press SLEEP once to show the
remaining time before switching off.
If you continue pressing the SLEEP
button, the next Sleep Timer option will
appear.
To cancel the sleep timer
Press SLEEP repeatedly until "OFF"
appears or press the STANDBY ON
button.
29