Lenovo ThinkCentre Edge 91 Hardware Maintenance Manual page 133

8. Install the new power supply assembly into the chassis so that the screw holes in the new power supply
assembly are aligned with the corresponding holes in the rear of the chassis. Then, install the three
screws to secure the new power supply assembly in place.
Note: Use only screws provided by Lenovo.
Figure 63. Installing the power supply assembly
9. Connect the new power supply assembly cables to all drives and the system board. See "Locating parts
on the system board" on page 109.
.
Chapter 9 Replacing FRUs (Machine Types: 1857, 1893, and 1895)
129