Figure 52. Reinstalling the front bezel
5. To complete the installation or replacement, go to "Completing the parts replacement" on page 154.
Accessing the system board components and drives
Attention:
Do not open your computer or attempt any repair before reading and understanding the "Important safety information"
in the ThinkCentre User Guide. To obtain a copy of the ThinkCentre User Guide, go to:
http://www.lenovo.com/ThinkCentreUserGuides
This section provides instructions on how to access the system board components and drives.
To access the system board components and drives, do the following:
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Remove the computer cover. See "Removing the computer cover" on page 116.
3. Remove the front bezel. See "Removing and reinstalling the front bezel" on page 117.
4. Pivot the drive bay assembly upward to access all the internal drives, cables, and other components.
118
ThinkCentre Hardware Maintenance Manual