Introduction; Read This Manual Thoroughly; Contents; Operation And Maintenance - Bryant ASPAS1BBA007 Parts, Adjustment And Maintenance Manual

INTRODUCTION

This Bryant model is a compact, high performance,
air-cooled, engine-driven
automatically supply electrical power to operate critical
loads during a utility power failure.
This unit is factory installed in an all-weather, metal enclosure
that is intended exclusively for outdoor installation. This
generator will operate using either vapor withdrawn liquid
propane (LP) or natural gas (NG).

READ THIS MANUAL THOROUGHLY

Throughout this publication,
decals affixed to the generator, DANGER, WARNING,
CAUTION and NOTE blocks are used to alert personnel
to special instructions about a particular operation that
may be hazardous if performed incorrectly or carelessly.
Observe them carefully. Their definitions are as follows:
DANGER
After this heading, read instructions that, if not
strictly complied with, will result in serious
personal injury, including death, in addition to
property damage.
After this heading, read instructions that, if not
strictly complied with, may result in serious
personal injury or property damage.
After this heading, read instructions that, if not
strictly complied with, could result in damage to
equipment and/or property.
After this heading, read explanatory statements
that require special emphasis.
These safety warnings cannot eliminate the hazards
that they indicate. Common sense and strict
compliance with the special instructions while
performing the service are essential to preventing
accidents.
Four commonly used safety symbols accompany the
DANGER, WARNING and CAUTION blocks. The type of
information each indicates follows:
This symbol points out important safety
!
information that, if not followed, could
endanger personal safety and/or property of
others.
This symbol points out potential explosion
hazard.
This symbol points out potential fire hazard.
This symbol points out potential electrical
shock hazard.
Bryant
generator designed
and on tags
NOTE:
The operator is responsible for proper and safe use
of the equipment. Bryant strongly recommends that the
dealer read this Parts, Adjustment and Maintenance
to
Manual and thoroughly understand all instructions before
using this equipment. Bryant also strongly recommends
instructing other users to properly start and operate the
unit. This prepares them if they need to operate the
equipment in an emergency.

CONTENTS

This manual contains pertinent information for three
different Bryant models:
•
ASPAS1BBA007
and
GH-410 Engine
•
ASPAS1BBA012
990 Engine
•
ASPAS1BBA015
990 Engine

OPERATION AND MAINTENANCE

It is the operator's responsibility to perform all safety
checks, to make sure that all maintenance for safe
operation is performed promptly, and to have the
equipment checked periodically by a Bryant Dealer.
Normal maintenance service and replacement of parts
are the responsibility of the owner/operator and, as such,
are not considered defects in materials or workmanship
within the terms of the warranty. Individual operating
habits and usage contribute to the need for maintenance
service.
Proper maintenance and care of the generator ensures a
minimum number of problems and keep operating
expenses at a minimum. See a Bryant Dealer for service
aids and accessories.

HOW TO OBTAIN SERVICE

When the generator requires servicing or repairs, contact
a Bryant Dealer for assistance. Service technicians are
factory-trained and are capable of handling all service
needs.
When inquiring about parts or service, always supply the
complete model number and serial number of the unit as
given on its data decal, which is located on the generator.
See Figure 1.1 or Figure 1.2 in Section 1.4 of the Owner's
Manual for decal location.
Model No. ____________ Serial No. ____________
– 6 kW NG, 7 kW LP, single-cylinder
– 12 kW NG, 12 kW LP, V-twin GT-
– 13 kW NG, 15 kW LP, V-twin GT-