Brother P-TOUCH QL-560 Setup & Operation Manual page 19

13
Click [Install].
The screen in which the name and password of the administrator is now displayed.
Input the "Name" and the "Password" of the administrator and click
[OK].
The screen to check the installation is displayed.
When continuing the installation, click [Continue Installation].
The installation starts.
14
When the installation is completed and the message "The software
was successfully installed" is displayed, click [Restart].
®
Your Mac will restart.
The installation of the printer driver is now complete.
15
After rebooting, connect the USB
cable and power cord to the
printer.
Remove the caution label before
connecting the USB cable.
16
Connect the USB cable to the USB port of the Mac
Press the ON/OFF button ( ) on the printer to turn on the power.
If you are using a USB hub and your Mac
printer, try connecting the printer directly to your Mac
17
Double click the drive where Mac OS
order [Applications]-[Utilities]-[Printer Setup Utility (Print Center)].
The Printer List screen is displayed.
When the Printer List screen is displayed, click [Add].
18
Click [Add] (Add Printer).
19
Click [USB], "QL-560", and [Add].
The screen returns to Printer List screen.
USB port
USB cable
®
.
®
has problems recognizing the
®
.
®
X is installed, and click in
17
STEP
1
STEP
2
Power cord slot
Power cord
STEP
3
STEP
4