Adjusting Density; Setting Your Changes As The New Default - Brother DCP-J125 Advanced User's Manual

Place your document face down in the
direction shown below.

2 in 1 (P)

2 in 1 (L)

4 in 1 (P)

4 in 1 (L)

Poster(3 x 3)
You can make a poster size copy of a
photograph.

Adjusting Density

You can adjust the copy density to make
copies darker or lighter.
a
Load your document.
b
Enter the number of copies you want.
c
Press a or b to choose Density.
Press OK.
d
Press c to make the copy darker or
press d to make the copy lighter.
Press OK.
e
If you do not want to change additional
settings, press Black Start or
Color Start.
Setting your changes as the
new default
You can save the copy settings for Quality,
Enlarge/Reduce, Density and
Page Layout that you use most often by
setting them as the default settings. These
settings will stay until you change them again.
a
Press a or b to choose your new setting.
Press OK.
Repeat this step for each setting you
want to change.
b
After changing the last setting, press
a or b to choose Set New Default.
Press OK.
c
Press + to choose Yes.
d
Press Stop/Exit.
Making copies
3
3
3
7