Alpine DVI-9990 Manual For Installation And Connections page 12

• System Connection <Example 2>
Video output connector
DVD Audio Link cable
(Included with the PXI-H990 or DAI-C990)
IONBUS cable
(Included with the PXI-H990 or DAI-C990)
*
Power supply unit
NOTES
• Do not install the power supply unit where it will be exposed to moisture such as under the floor mat or near the air
conditioner. This may cause a malfunction.
• Do not bundle the power supply unit cable with the audio cables. Noise may be induced into your system.
• The power supply unit temperature can become hot. This is not a malfunction.
* For the Ferrite Core, refer to the Owner's Manual of the product that the IONBUS cable is attached to.
Connectable system products
Multimedia Manager or DAC unit
External TV monitor
Yellow
To DVD Audio Link
terminal
*
To IONBUS
terminal
Antenna Receptacle
Blue
POWER
ILLUMINATION
Orange
Black
GND
IGNITION
Red
BATTERY
Yellow
Fuse (7.5A)
RCA Extension cable (video)
(Included)
Multimedia Manager
PXI-H990
or
DAC unit
DAI-C990
(sold separately)
To antenna plug of the vehicle
To power antenna
To the instrument cluster illumination lead
Connect to a metal part of chassis body with a screw.
Ignition Key
PXI-H990 or DAI-C990
IONBUS incompatible
TV monitor
External TV
monitor
(sold separately)
System switch
• Set to SINGLE when
connecting one PXI-H990.
• When connecting two PXI-
H990s, set the first to FRONT,
and the second to REAR.
Battery
11
-EN