Canon Satera LBP8610 User Manual page 14

■ Envelope
The envelopes that can be used with this printer are YOUNAGA No. 3, NAGAGATA No. 3,
and KAKUGATA No. 2 with the following structures only. Load the envelopes with the
address side (non-glued side) facing up in the multi-purpose tray.
YOUNAGA No. 3
120 mm 235 mm
IMPORTANT
Do not use the following types of envelopes. Using inappropriate envelopes may result in
•
paper jams that are difficult to clear or may result in damage to the printer.
- Envelopes with fasteners or snaps
- Envelopes with address windows
- Envelopes with adhesive on the surface
- Wrinkled or creased envelopes
- Poorly manufactured envelopes in which the glued parts are uneven
- Irregularly-shaped envelopes
Before loading the envelopes, flatten the stack of envelopes to release any remaining air,
•
and press the fold lines along the edges tight.
Do not print on the reverse side (glued side) of envelopes.
•
When loading envelopes at a size of YOUNAGA No. 3, load them so that the flap is
•
toward the left of the printer when viewed from the front.
( : Feeding direction)
NAGAGATA No. 3
120 mm 235 mm
KAKUGATA No. 2
240 mm 332 mm
Envelope K-201G for
Canon LBP/recommended
13