Connecting To A Switchboard; Inserting A Pause; Recall (R) - BT Graphite 1100 User Manual

General information 43

Connecting to a switchboard

This product is intended for use within the UK for
connection to the public telephone network and
compatible switchboards, which support tone dialling
and timed break recall. If in doubt please consult your
service provider.

Inserting a pause

With some switchboards, after dialling the access code
you may have to wait for a moment while the
switchboard picks up an outside line so you will need
to enter a pause in the dialling sequence.
Press and hold to insert a pause (P) before
entering the telephone number.
You may also need to enter a pause when storing
international numbers or charge card numbers.

Recall (R)

You may need to use the recall function if you are
connected to a switchboard/PBX (Private Branch
Exchange), contact your PBX supplier for further
information. The recall function is set to timed break
recall and is also used for BT Calling Feature.
If you experience any problems, please call the Helpline on 0870 242 6652*