BT Graphite 1100 User Manual page 37

No display
• The batteries may be flat, dead or incorrectly inserted.
• Recharge or replace the batteries.
icon flashes
• Is the handset registered correctly to the base, see page 33.
• Check that the mains power is correctly connected.
• Check that the handset is within range of the base.
• The batteries are low, place the handset on the base/charger to recharge.
You hear the busy tone when you press
• Make sure the handset is in range of the base.
• Another handset registered to your BT Graphite 1100 base may be on the line.
No Caller Display number/name displayed
• Have you subscribed to a Caller Display service from your network provider, see page 24.
• The caller may have withheld their number.
• An exact name/number match was not found in your directory. Check that you have stored the
full STD dialling code.
If you experience any problems, please call the Helpline on 0870 242 6652*
.
Help 37