Brother P-touch PT-210E Service Manual page 6

CHAPTER II MECHANISMS .....................................................Refer to PT-220 (P. II-1)
2.1 THEORY OF OPERATION ..........................................................................Refer to PT-220 (P. II-1)
2.1.1 Print Mechanism ............................................................................Refer to PT-220 (P. II-1)
2.1.2 Platen Roller, (Tape Feed) Sub Roller Setting
& Retracting Mechanism ................................................................Refer to PT-220 (P. II-2)
2.1.3 Tape & Ribbon Feed Mechanism ...................................................Refer to PT-220 (P. II-4)
2.1.4 Tape Cutter Mechanism .................................................................Refer to PT-220 (P. II-6)
2.1.5 Interlock Mechanism of the Roller Holder ASSY
and Cassette Cover........................................................................Refer to PT-220 (P. II-7)
2.2 DISASSEMBLY & REASSEMBLY ...............................................................Refer to PT-220 (P. II-8)
2.2.1 Disassembly Procedure..................................................................Refer to PT-220 (P. II-8)
[1] Removing the cassette cover,
the tape cassette and the batteries .........................................Refer to PT-220 (P. II-8)
[2] Removing the cassette spring and pin ....................................Refer to PT-220 (P. II-9)
[3] Removing the bottom cover ...................................................Refer to PT-220 (P. II-9)
[4] Removing the frame ASSY .................................................. Refer to PT-220 (P. II-11)
[5] Removing the battery terminal support
and releasing the battery terminals ....................................... Refer to PT-220 (P. II-14)
[6] Removing the sub PCB ........................................................ Refer to PT-220 (P. II-16)
[7] Removing the main PCB and the rubber 52 key ................... Refer to PT-220 (P. II-17)
2.2.2 Reassembly Procedure ................................................................ Refer to PT-220 (P. II-18)
[1] Installing the rubber 52 key and main PCB ........................... Refer to PT-220 (P. II-18)
[2] Installing the sub PCB .......................................................... Refer to PT-220 (P. II-19)
[3] Installing the battery terminals and battery terminal support . Refer to PT-220 (P. II-20)
[4] Mounting on the Bottom Cover of the Frame ASSY.............. Refer to PT-220 (P. II-23)
[5] Installing the bottom cover ................................................... Refer to PT-220 (P. II-27)
[6] Mounting the cassette spring and pin.................................... Refer to PT-220 (P. II-29)
[7] Installing the tape cassette, the batteries,
and the cassette cover ......................................................... Refer to PT-220 (P. II-30)
[8] Demonstration print and final check...................................... Refer to PT-220 (P. II-32)
2.3 TROUBLESHOOTING............................................................................... Refer to PT-220 (P. II-34)
2.3.1 Precautions .................................................................................. Refer to PT-220 (P. II-34)
2.3.2 After Repairing ............................................................................. Refer to PT-220 (P. II-34)
2.3.3 Troubleshooting Flows ................................................................. Refer to PT-220 (P. II-35)
[1] Tape feeding failure ............................................................. Refer to PT-220 (P. II-35)
[2] Printing failure ...................................................................... Refer to PT-220 (P. II-37)
[3] Powering failure (Nothing appears on the LCD) .................... Refer to PT-220 (P. II-39)
2
P-touch
SERVICE MANUAL