Replacing The Rear Fan Assembly - Lenovo ThinkCentre A57e Hardware Maintenance Manual

Machine type 6306
Hide thumbs Also See for ThinkCentre A57e:
Table of Contents

Advertisement

4. Press the release button and slide the diskette drive out the front of the
5. Remove the retainer bracket from the failing diskette drive and install it on the
6. Slide the new diskette drive into the drive bay until it snaps into position.
7. Connect the signal and power cables to the drive.
8. Go to "Completing the FRU replacement" on page 104.

Replacing the rear fan assembly

This section provides information on how to remove and replace the system fan.
To remove or replace the system fan, do the following:
1. Remove the computer cover. See "Opening the cover" on page 84.
2. Locate the rear fan assembly. Disconnect the rear fan cable from the system fan
computer.
new diskette drive.
Attention
Do not open your computer or attempt any repair before reading and understanding the
"Important safety information" in the ThinkCentre Safety and Warranty Guide that came with
your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to:
http://www.lenovo.com/support
connector on the system board. See "Locating parts on the system board" on
page 86.
Chapter 8. Replacing FRUs - Tamdhu Computers
97

Advertisement

Table of Contents
loading

Table of Contents