Advertisement
Gear Case Kit
Assemble Housing
1. Install the side covers (A, Figure 4) and secure with
the original hardware.
2. Reinstall the bearings (C), washers, and retaining
rings (D) in both side covers.
Fill Auger Gear Case Oil
1. Remove the fill plug (Figure 5). Fill the gear box with
The Dealer Line Winter Weight Worm Gear Oil until
the oil level reaches the bottom of the fill hole.
A
B
Figure 4. Assemble Housing
A. Side Cover
B. Housing
C. Bearing
D. Washers & Retaining Ring
Figure 5. Checking Auger Gear Case Lubrication
3
Installation Instructions
C
Pipe Plug
D
Advertisement
