MX-5_8CC1-EA-11F_Edition2 Page378
Monday, July 18 2011 10:9 AM
Maintenance and Care
Owner Maintenance
5. Remove the trunk lid release lock-out
button connector.
6. On the side the bulb is to be replaced,
pull the center section of the plastic
retainers and remove them, then
remove the trunk side trim.
Removal
Installation
7. Disconnect the bulb from the socket.
8-42
Form No.8CC1-EA-11F
Black plate (378,1)
Rear turn signal lights
Reverse lights
Brake lights/Taillights
8. Install the new bulb in the reverse order
of the removal procedure.