Turn And Lane-Change Signals; Fog Lights Í - Mazda MX-5 Miata Owner's Manual

MX-5_8CC1-EA-11F_Edition2 Page214
Monday, July 18 2011 10:8 AM
Driving Your Mazda
Switches and Controls
Turn and Lane-Change
Signals
Turn Signals
Move the signal lever down (for a left
turn) or up (for a right turn) to the stop
position. The signal will self-cancel after
the turn is completed.
If the indicator light continues to flash
after a turn, manually return the lever to
its original position.
Green indicators on the dashboard show
which signal is working.
Lane-change signals
Move the lever slightly toward the
direction of the change
indicator flashes and hold it there. It
will return to the off position when
released.
NOTE
If an indicator light stays on without flashing
or if it flashes abnormally, one of the turn
signal bulbs may be burned out.
í
5-58
Some models.
Form No.8CC1-EA-11F
Use this switch to turn on the fog lights.
The fog lights will help you to see as well
as be seen under foggy conditions or at
night.
To turn the fog lights on, rotate the fog
light switch to the
The headlight switch must be in the
position before turning on the fog lights.
Right turn
Right lane change
OFF
Left lane change
To turn them off, rotate the fog light
Left turn
switch to the OFF position or turn the
headlight switch to the
position.
NOTE
The fog lights will turn off when the headlights
are set at high beam.
until the
Black plate (214,1)
í
Fog Lights
position.
Fog light switch
or OFF