How To Use The Automatic Locking Mode For Use With Child Safety Seats; How To Disengage The Automatic Locking Mode - Mazda Tribute Owner's Manual

Seating and Safety Restraints
How to use the automatic locking mode for use with child safety
seats
• Buckle the combination lap and
shoulder belt.
• Grasp the shoulder portion and
pull downward until the entire
belt is pulled out.
• Allow the belt to retract. As the belt retracts, you will hear a clicking
sound. This indicates the safety belt is now in the automatic locking
mode.

How to disengage the automatic locking mode

Disconnect the combination lap/shoulder belt and allow it to retract
completely to disengage the automatic locking mode and activate the
vehicle sensitive (emergency) locking mode.
If the safety belt is not coming out of the retractor when it looks to be
fully retracted, check to see if it might still be attached to the side of the
vehicle by the snaps designed to keep it out of the way when you last
put the rear seat into cargo configuration. Refer to Returning the rear
seats to upright position in this chapter.
86
2006 Tribute (j14)
Owners Guide (post-2002-fmt)
USA (fus)