Using The Engine Block Heater; Brakes - Mazda Tribute Owner's Manual

Note: Improve vehicle ventilation by
keeping all air inlet vents clear of
snow, leaves and other debris.
USING THE ENGINE BLOCK HEATER (IF EQUIPPED)
An engine block heater warms the engine coolant, which improves
starting, warms up the engine faster and allows the heater-defroster
system to respond quickly. Use of an engine block heater is strongly
recommended if you live in a region where temperatures reach -10°F
(-23°C) or below.
For best results, plug the heater in at least three hours before starting
the vehicle. Using the heater for longer than three hours will not harm
the engine, so the heater can be plugged in the night before starting the
vehicle.
WARNING: To reduce the risk of electrical shock, do not use
your heater with ungrounded electrical systems or two-pronged
(cheater) adapters.

BRAKES

Your service brakes are self-adjusting. For service maintenance section
about the brakes, refer to the Scheduled maintenance section in the
Maintenance and Specification chapter.
Occasional brake noise is normal and often does not indicate a
performance concern with the vehicle's brake system. In normal
operation, automotive brake systems may emit occasional or intermittent
squeal or groan noises when the brakes are applied. Such noises are
usually heard during the first few brake applications in the morning;
however, they may be heard at any time while braking and can be
aggravated by environmental conditions such as cold, heat, moisture,
road dust, salt or mud. If a "metal-to-metal," "continuous grinding" or
"continuous squeal" sound is present while braking, the brake linings
may be worn-out and should be inspected by an authorized dealer.
2006 Tribute (j14)
Owners Guide (post-2002-fmt)
USA (fus)
Driving
163