Saving A File - Brady LabelMark 3 User Manual

To change to a different label part:
1. Click the Label Part Setup icon
2. Select a new Printer type and Part Name from the Select New Part tab.
3. Click Apply to File to preview the new part. Click Restore to change back to the Original part.
Note: If the new part is smaller than the original, your data may no longer fit (see Making Data Fit
on a Label).
4. Click Close when finished.
Note: The other tabs on the Label Part Setup dialog box are covered in Modifying a Label Part, Creating a
Custom Label Part and Deleting a Custom Label Part.

Saving a File

To save a label file or template:
1. Select File Save or click the Save icon
2. In the File name box, type a name for your label file. The system adds the appropriate file
extension.
3. Click Save.
Basic LabelMark Techniques
on the Standard toolbar.
on the toolbar.
Basic LabelMark Techniques
29