Manage Printer/Part Pairings - Brady LabelMark 5.0 User Manual

Manage Printer/Part Pairings

You can pair a printer and label part so whenever you print the specified part, by default it
prints to its paired printer. You can also set the corrective offsets for that printer.
To set Printer/Parts Pairing:
Choose Tools>Manage Printer/Part Pairings
1.
On the Master tab, use the Filter to narrow the list of part numbers.
In the Filter field, enter the first letter(s) or number(s) of the part number for which you
2.
are searching. As you add letters or numbers in the filter, the list automatically displays
only those part numbers containing the sequence of letters or numbers.
When the list displays, click the desired part number.
3.
Click Add
4.
The part number is moved to the "printer" side of the screen.
On the printer side, click the drop down arrow under Printer and select the printer to which
5.
you want to print the particular label part.
Change the Horizontal and Vertical Adjustment if necessary. (Highlight the number and
6.
enter a new adjustment number.)
Repeat the above steps for as many pairings as needed.
7.
When finished, click Save.
8.
.
Manage Printer/Part Pairings
LabelMark5.0 User's Manual
123