Electrolux HD-Line 726553 Specifications

Electrolux HD-Line
290 lt refrig. counters - upstand
The Electrolux range of refrigerated counters combines the convenience of worktop space with cold storage
located below. This range of counters is constructed in 304 AISI stainless steel to meet the highest hygiene
standards. The range is comprised of three sizes of counters, with built-in or remote compressor units, in
various door or drawer configurations and in refrigerator or freezer versions. The models detailed on this sheet
are refrigerated counters with two sections and operate with a temperature range of –2°C to +10°C.
EASY TO INSTALL
• Mounted on legs with height
adjustment.
• Built-in compressor to suit
operating conditions.
• Suitable for use in ambient
temperatures of up to 43°C.
EASY TO CLEAN
• Constructed in 304 AISI
stainless steel to meet the highest
hygiene standards.
• Rounded internal corners for
ease of cleaning.
• Mounted on stainless steel legs
to provide 150 mm clearance for
easy floor cleaning.
• Worktop fitted with rounded
edge on models RCDR2M20UX
and RCDR2M12X.
EASY TO USE
• Adjustable temperature range
from –2°C to +10°C to suit meat,
fish and dairy storage
requirements.
• Anti-tilt runners accept GN1/1
containers.
• Combination of doors and
drawers to suit varying needs, with
the possibility to change the
configuration on site.
• Electronic microprocessor
control with external digital
temperature display.
• Forced air circulation for rapid
cooling and an even temperature
distribution.
• Worktop in 304 AISI stainless
steel 50 mm in thickness.
• Integrated rear upstand.
EASY TO MAINTAIN
• Access to all components from
the front.
EASY ON THE ENVIRONMENT
• CFC and HCFC free (ecological
refrigerant type: R134a, - gas in
foam: cyclopenthane).
• 60 mm insulation thickness for
energy saving.
• Developed and produced in ISO
9001 and ISO 14001 certified
factory.
• All models comply with the
standards required by the main
international approval bodies and
are H marked.
726553