3D Camera; Taking A 3D Photo - LG Thrill P925 Owner's Manual

3D Camera

3D Camera Viewfinder
Brightness – This defines and controls of the amount of sunlight entering the lens. Slide
the brightness indicator along the bar towards "-" for a lower brightness
image or towards "+" for a higher brightness image.
3D Focus – You can manually fine-tune the 3D focus by adjusting the amount of
overlapping.
Camera Switch - Allows you to switch between the front and back cameras.
Settings – Tap this icon to open the settings menu. The options are similar to the 2D
camera with the addition of 3D focus mode.
3D focus mode – Select the auto 3D focus option from Border and Center.
Border uses a border area for optimizing the amount of overlapping. Center
uses a center area for it. You can also fine tune manually with the 3D focus
function on the viewfinder.
Image size – Tap to set the size of the 3D photo you will take. Set your 3D
photo image size to 3M (2048X1536), 2M (1600X1200), or 1M (1280X960).
Flash – Allows you turn on the flash when taking a picture in a dark place.

Taking a 3D photo

1 From the Home screen, tap the Apps Key
2 Holding the phone horizontally, point the lens towards the subject you want to photograph.
3 Touch and hold the Capture Button
viewfinder screen.
4 When the focus box turns green, the camera has focused on your subject.
5 Release the Capture Button
> 3D Camera
lightly and a focus box will appear in the center of the
to take the picture.
.
43