Canon PowerShot A200 Software Starter Manual page 89

Cause #5
The Communications Settings are incorrect.
If the following screen appeared when you connected the camera with the USB cable,
the Communications Settings are incorrect. In the [Port Type] section, select [USB], and
in the [Detected Camera Models] section, select the name of your camera model.
Cause #6
The camera is being recognized as an "Other device". (Windows only)
Use the procedures below to check whether or not your camera is being recognized
as an "Other device". If it is being recognized as an "Other device", delete its driver
and setup information files and reinstall the driver.
Windows 98/Windows Me
Checking whether the camera is being recognized as an
"Other device", and deleting the driver.
1.
In the [Control Panel], double-click the [System] icon.
The [System Properties] dialog appears.
2.
Click the [Device Manager] tab.
3.
Click the of [Other devices] and/or [Imaging Devices].
If your camera is being recognized as an "Other device", its model name
will appear.
• If your camera model name does not appear, or if [Other devices] and/or
[Imaging Devices] do not appear, the cause lies elsewhere. Proceed to step 6
to end this operation and refer to the other causes. (pp. 84 - 88)
4.
Select the name of your camera model and click [Remove].
5.
In the confirmation dialog, click [OK].
Remove all copies of your camera model name that appear in the [Other
devices] or [Imaging Device] categories, or that appear more than once in
one category.
6.
Click [OK] to close the [System Properties] dialog.
85