Canon SD400 - PowerShot Digital ELPH Camera Software User's Manual page 62

Chapter 4
Viewing Images
Changing the Display Magnification (Zoom Mode Only)
■
Using the Display Size Slider
In the zoom mode, you can change the display magnification
for the entire Browser Area by moving the slider above the
image either left or right.
■
Using the Zoom In/Zoom Out Buttons
If you click (Zoom In) on the Display Control Panel, the
mouse pointer appears with a plus (+) symbol at its center. If
you click on the Browser Area in this state, the display zooms in
(magnified display), centered on the clicked area.
Similarly, if you click
actions, the display will zoom out (reduced display).
REFERENCE
• When the display magnification level is
high, a Navigator window such as the one
at the right appears. The area enclosed by
the red marks indicates the area of the
image shown in the Browser Area.
62
ZoomBrowser EX Software User Guide
Changing the Main Window Display Mode (3/4)
(Zoom Out) and perform the same
■
Changing the Display Position
You can move the display position in the Browser Area by
clicking the (Select) in the Display Control Panel and
moving the red marks in the Navigator.