Canon SD400 - PowerShot Digital ELPH Camera Software User's Manual page 13

Chapter 2
Downloading and
Printing Images
Auto Start
You can start ZoomBrowser EX with this method by attaching
the camera to the computer and preparing it to transfer data.
Set the following Auto Start Settings the first time (only) that
you connect the camera to a computer. If you have already set
them, proceed to the steps on the next page.
■
Settings for the First Connection to a Computer
1.
Use the interface cable to connect the camera to the
computer.
Please see your Camera User Guide for information on how to
connect the camera to a computer. With some camera models,
you must set the camera to the Playback mode to establish a
connection to a computer.
A dialog similar to the following one (Events dialog) will appear.
If it does not, read the Troubleshooting section in the
Appendices.
13
ZoomBrowser EX Software User Guide
Downloading Images to a Computer (2/8)
2.
Select [Canon CameraWindow] and click [OK].
The purpose of these settings is to have ZoomBrowser EX's
Camera Control Window open automatically when the camera
is connected to the computer. This will cause the Camera
Control Window in Step 1 on the next page to open.
REFERENCE
• With a memory card reader, the Events dialog will appear each
time. Select [View/Download Images using Canon
CameraWindow] to open the Camera Control Window.
Your camera model name or
"Canon Camera" will appear
here.
Your computer system
will determine which
programs appear.