Priority" Function - Bosch Remote Control User Manual

Using the remote control
Fig. 9 Memorizing water
temperature
B Only one temperature per remote
control can be memorized using the
"Program" button on the remote
control.
B At this point the remote control will
display the memorized temperature .
When the hot water tap is turned on,
the water heater will supply hot
water at the temperature memorized
on the remote control.
Up to six addition remote
i
controls can be used to
memorize a temperature
for each remote control.
Using the
(operation
temperature)
To operate the equipment with a
previously memorized temperature:
10
"Program" button
with memorized
B Press the "Program" button on the
remote control.
The remote control display and heater
display will now show the previously
memorized temperature. When the hot
water tap is turned on, the water heater
will supply hot water after a few
seconds, at
temperature.
4.6

"Priority" function

Temperature cannot be
i
memorized or changed
using the heater's
control panel buttons or
a second remote control
when hot water is in use
(e.g. during a shower)
The "Priority" function
will automatically
activate to stop another
user from modifying the
temperature when hot
water is in use.
The remote control does not have a
default temperature
therefore has no default "Priority"
function.The "priority" will be attributed
automatically by the first user who
selects or memorizes (on the remote
control or on the heater's control
panel) a temperature for subsequent
the memorized
setting and
6 720 606 990